Sony Digital betacam DVW-970 Operation Manual page 149

No. Page Item
M08 TIMECODE TC OUT
DF/NDF
(DVW-970 only)
EXT-LK UBIT
LTC UBIT
VITC UBIT
WATCH AUTO ADJ
UBIT GROUP ID
VITC INS LINE 1
VITC INS LINE 2
M09 VTR MODE REC TALLY BLINK
REC START BEEP
LCD DISPLAY
HOLD
LCD HOLD TIMER
VIDEO OUT (F/R)
STBY OFF TIMER
STOP KEY FREEZE OFF/FRAME/
Settings Default
AUTO/GENE AUTO
DF/NDF DF
INT/EXT INT
FIX/TIME FIX
FIX/TIME FIX
OFF/ON ON
000/101 000
12 to 19 H 16H
(DVW-970)
9 to 22 H 19H
(DVW-970P)
12 to 19 H 18H
(DVW-970)
9 to 22 H 21H
(DVW-970P)
OFF/ON ON
OFF/ON OFF
TIMER/OFF/CONT TIMER
1H/3H/8H 1H
EE/PB EE
OFF/5MIN/10MIN/ 60MIN
30MIN/60MIN
OFF
FIELD
Description
Selects the time code signal output.
AUTO: Outputs the time code generator
output during recording and outputs the
time code reader output during playback.
GENE: Outputs the time code generator
output during recording and playback.
Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the time
code is locked to an external source.
INT: Internal lock
EXT: External lock
Sets the data to be recorded in UBIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Sets the data to be recorded in UBIT of VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Turns the automatic time correction function
of the built-in clock on/off . With ON, the time
of the built-in clock matches with the time
data of the user bits of an external time code.
Selects the UBIT GROUP ID.
Selects the line into which VITC is to be
inserted.
Selects the line into which VITC is to be
inserted.
Turns the tally illumination control on/off in the
event of BATTERY BEFORE END/DISC
BEFORE END.
Turns on/off the alarm sound at REC START/
STOP.
Sets the time code (TC) display after power-
off as follows.
TIMER: The TC display turns off after the
elapse of the time set by the LCD HOLD
TIMER below.
OFF: Not displayed.
CONT: Displayed.
Sets the duration of time after which the TC
display is to be turned off after power-off,
when LCD DISPLAY HOLD is set to TIMER
(H: hours).
Selects the video output signal during FF/
REW.
EE: Input signal
PB: Playback signal
Sets the length of time for the stand-by off
timer.
Selects the freeze function.
149
Menu List