Paint Menu - Sony Digital betacam DVW-970 Operation Manual

PAINT Menu

The following table lists and describes the items in the
PAINT menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
No. Page
P01 SW STATUS
P02 WHITE
P03 BLACK/FLARE
140
Menu List
Item Settings
GAMMA OFF/ON
CHROMA OFF/ON
MATRIX OFF/ON
KNEE OFF/ON
WHITE CLIP OFF/ON
DETAIL OFF/ON
APERTURE OFF/ON
FLARE ON/OFF
EVS OFF/ON
TEST SAW OFF/REC/SAW
COLOR TEMP <A> Display color
temperature
COLOR FINE <A> (–99 to +99)
R GAIN <A> (–99 to +99)
B GAIN <A> (–99 to +99)
D5600K <A> OFF/ON
COLOR TEMP <B> Display color
temperature
COLOR FINE <B> (–99 to +99)
R GAIN <B> (–99 to +99)
B GAIN <B> (–99 to +99)
D5600K <B> OFF/ON
MASTER BLACK (–99 to +99)
R BLACK (–99 to +99)
B BLACK (–99 to +99)
MASTER FLARE (–99 to +99)
R FLARE (–99 to +99)
G FLARE (–99 to +99)
B FLARE (–99 to +99)
FLARE OFF/ON
TEST OUT SELECT ENC/R/G/B
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
Default Description
ON Turns the gamma correction on/off.
ON Turns the chroma of the composite signal on/
off.
ON Turns the linear matrix correction on/off.
ON Turns the knee correction on/off.
ON Turns the white clipping correction on/off.
ON Turns the detail signal on/off.
ON Turns the aperture function on/off.
ON Turns the flare function on/off.
OFF Turns the EVS shutter on/off.
OFF Selects the test signal.
3200 Sets the color temperature of WHITE A.
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
0 Only the value of R GAIN is changed.
0 Only the value of B GAIN is changed.
OFF Turns the WHITE A electronic 5600K filter on/
off.
3200 Sets the color temperature of WHITE B.
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
0 Only the value of R GAIN is changed.
0 Only the value of B GAIN is changed.
OFF Turns the WHITE B electronic 5600K filter on/
off.
0 Adjusts the master black level.
0 Adjusts the R black level.
0 Adjusts the B black level.
0 Adjusts the flare level of the master.
0 Adjusts the R flare level.
0 Adjusts the G flare level.
0 Adjusts the B flare level.
ON Turns the flare correction circuit on/off.
ENC Selects the output signal of TEST OUT
connector.