Sony Digital betacam DVW-970 Operation Manual page 20

CH-1/2/CH-3/4 MONITOR
switch switch
position position
CH-1/2 CH-1
MIX
CH-2
CH-3/4 CH-3
MIX
CH-4
f MONITOR volume control
This control adjusts the speaker or earphone volume for
sounds other than the alarm sound. At the minimum
position, no sound can be heard.
i LEVEL (CH-1/CH-2) (audio channel-1 and
channel-2 recording level) controls
These controls adjust the audio levels of channels 1 and 2
when the AUDIO SELECT switches are set to MANUAL.
20
Audio Functions
Audio output
Audio channel 1
Mix sound of channels 1 and 2
Audio channel 2
Audio channel 3
Mix sound of channels 3 and 4
Audio channel 4
i LEVEL (CH-1/CH-2) controls
j AUDIO SELECT CH-1/CH-2 switches
CUE IN
k AUDIO IN CH-1/CH-2/CH-3/CH-4 switches
CH-1
MIX
CH-2
l CUE IN switch
m AUDIO OUT connector
n AUDIO IN CH1/CH2 connectors
and LINE/MIC/+48V ON switches
o DC OUT 12V connector
Audio functions (2)
g ALARM volume control
This control adjusts the speaker or earphone alarm volume.
At the minimum position, no sound can be heard.
Minimum
ALARM volume control
h Built-in speaker
The speaker can be used to monitor E-E sound during
recording, and playback sound during playback. The
speaker also sounds alarms to reinforce visual warnings.
If you connect an earphone to the EARPHONE jack, the
speaker is automatically muted.
See "8-3 Operation Warnings" on page 129 for
information about alarms.
j AUDIO SELECT CH-1/CH-2 (audio channel-1 and
channel-2 adjustment method selection) switches
These switches select the audio level adjustment method
for each of audio channels 1 and 2.
AUTO: Select this setting for automatic adjustment.
MANUAL: Select this setting for manual adjustment.
Maximum