Sony Digital betacam DVW-970 Operation Manual page 152

No. Page
M15 FUNCTION 3
M16 GENLOCK
M17 ND COMP
M18 AUTO SHADING AUTO BLK
M19 VANC RX
152
Menu List
Item Settings
WHT FILTER INH OFF/ON
COLOR BAR SEL SMPTE/EBU/SNG
REC TALLY UPPER/BOTH
COLOR VF INPUT COMP/VBS/BOTH
USER & ALL ONLY OFF/ON
RM COMMON OFF/ON
MEMORY
RM REC START RM/CAM/PARA
REC INH. WITH OFF/ON
CCU
EXT VTR REC CTL OFF/ON
GENLOCK OFF/ON
RETURN VIDEO OFF/ON
GL H PHASE (–99 to +99)
GL SC PHASE (–99 to +99)
GL SC 0/180 SEL 0/180
ND OFFSET OFF/ON
ADJUST
CLEAR ND —
OFFSET
EXEC
SHADING
RESET BLK SHD EXEC
TEST OUT SELECT ENC/R/G/B
MASTER GAIN –3/0/3/6/9/12/18/
(TMP) 24/30/36/42/48 dB
UMID LINE 0/12/13/15/16/17/
18/19 (DVW-970)
0/9/10/12/13/15/16/
17/18 (DVW-970P)
Default Description
OFF Turns on and off the function which inhibits
independent white memory for each filter
position.
SMPTE Selects the color bar type.
(DVW-
970)
EBU
(DVW-
970P)
UPPER Selects whether to light the upper tally
indicator only, or both upper and lower tally
indicators.
COMP For video input selection when a color
viewfinder is used
OFF Selects whether to show only USER, USER
MENU CUSTOMIZE, and ALL menus in the
top menu.
OFF Selects whether or not to share settings for
when an RM remote control unit is connected
and when the unit is used alone.
RM Selects which VTR START/STOP buttons (on
the RM, camera, or both) are enabled when
an RM-series remote control unit is
connected.
ON Selects whether to disable recording
operations when a CCU is connected. A
large viewfinder cannot be used with the OFF
setting.
OFF Selects whether to synchronize recording
with an external VTR via a CCZ cable when
the CA-702 is connected.
ON Turns genlock on and off.
OFF Turns return video on and off.
0 Adjusts the genlock H phase.
0 Adjusts the genlock subcarrier phase.
180 For coarse adjustment of the genlock
subcarrier phase.
— Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
EXEC Clears ND filter color compensation values.
EXEC Executes the auto black shooting function.
EXEC Clears black shooting compensation values.
ENC Selects the signal output to the TEST OUT
connector.
0 dB Temporarily sets the master gain value.
0 Selects the line on which the UMID is to be
recorded.