Connecting Your Camcorder To Your Computer Using The Usb Cable - For Macintosh Users - Sony Handycam DCR-TRV40E Operating Instructions Manual

Connecting your camcorder to
your computer using the USB
cable – For Macintosh users
When connecting to a computer
using the USB cable
You must install a USB driver onto your
computer in order to connect the camcorder to
the computer's USB connector.
The USB driver can be found on the CD-ROM
supplied, along with the application software
required for viewing images.
Recommended computer usage
environment when connecting
via USB cable and viewing
"Memory Stick" images on the
computer
Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS X
(v10.0/v10.1)
Standard installation is required.
However, note that the upgrade to Mac OS 9.0/
9.1 should be used for the following models.
•iMac with the Mac OS 8.6 standard installation
and a slot loading type CD-ROM drive
•iBook or Power Mac G4 with the Mac OS 8.6
standard installation
The USB connector must be provided as
standard.
QuickTime 3.0 or newer must be installed (to
play back moving pictures).
Notes
•Operations are not guaranteed for the
Macintosh environment if you connect two or
more USB equipment to a single computer at
the same time, or when using a hub.
•Some equipment may not operate depending
on the type of USB equipment that is used
simultaneously.
•Operations are not guaranteed for all the
recommended computer environments
mentioned above.
•Macintosh and Mac OS, QuickTime are
trademarks of Apple Computer Inc.
•All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies. Furthermore, "TM"
and "®" are not mentioned in each case in this
manual.
240