Sony Handycam DCR-TRV40E Operating Instructions Manual page 80

Using special effects
– Digital effect
(1) Set the POWER switch to CAMERA, press FN
to display PAGE1.
(2) Press DIG EFFT. The screen to select a desired
digital effect appears.
(3) Press a desired digital effect. In the STILL and
LUMI. modes, the still image is stored in
memory.
(4) Press –/+ to adjust the effect.
– : To reduce the effect
+ : To increase the effect
Items to be adjusted
STILL The rate of the still image you
want to superimpose on the
moving picture
FLASH The interval of frame by frame
playback
LUMI. The colour scheme of the area in
the still image which is to be
swapped with a moving picture
TRAIL The vanishing time of the
incidental image
SLOW SHTR Shutter speed. The larger the
shutter speed number, the slower
the shutter speed.
OLD MOVIE No adjustment necessary
(5) Press OK to return to PAGE1.
1
80
2~4
FN
DIG
EFFT
(1)
(2)
(3)
(4)
(5)
DIG EFFT
OFF OK
SLOW OLD
SHTR MOVIE
STILL
FLASH LUMI. TRAIL
The bar appears when setting following
digital effect : STILL, FLASH, LUMI.,
TRAIL./
DIG EFFT
OFF OK
– +
LUMI.