Frame By Frame Recording - Frame Recording - Sony Handycam DCR-TRV40E Operating Instructions Manual

Frame by frame
recording
– Frame recording
You can make a recording with a stop-motion
animated effect using frame recording. To create
this effect, alternately move the subject a little
and make a frame recording. We recommend
that you use a tripod, and operate your
camcorder using the Remote Commander after
step 4.
(1) In the standby, press MENU, then turn the
SEL/PUSH EXEC dial to select FRAME REC
in , the press the dial (p. 253).
(2) Turn the SEL/PUSH EXEC dial to select ON,
then press the dial.
(3) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(4) Press START/STOP to start frame recording.
Your camcorder makes a recording for about
six frames, and returns to recording standby.
(5) Move the subject, and repeat step 4.
To cancel the frame recording
Perform either of the following:
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
Note
The remaining tape time is not indicated
correctly if you use this function continuously.
When using the frame recording
The last recorded frame is longer than other
frames.
(1)
(2)
(3)
(4)
(5)
2
CAMERA SET STBY
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC OFF
INT. REC ON
RETURN
[ MENU ] : END
4
MENU
CAMERA SET STBY
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC ON
INT. REC
RETURN
[ MENU ] : END
95