Sony Handycam DCR-TRV40E Operating Instructions Manual page 124

Dubbing only desired scenes
– Digital program editing (on
tapes)
Operation 1: Making a
programme
(1) Insert the tape for playback into your
camcorder, and insert a tape for recording
into the VCR.
(2) Press MENU and turn the SEL/PUSH EXEC
dial to select VIDEO EDIT in
the dial (p. 261).
(3) Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial.
(4) Search for the beginning of the first scene you
want to insert using the video operation
buttons, then pause playback.
You can fine-adjust one frame at a time with
EDITSEARCH.
(5) Press MARK on the Remote Commander, or
turn the SEL/PUSH EXEC dial to select
MARK, then press the dial.
The IN point of the first programme is set,
and the top part of the programme mark
changes to light blue.
(6) Search for the end of the first scene you want
to insert using the video operation buttons,
then pause playback.
(7) Press MARK on the Remote Commander, or
the SEL/PUSH EXEC dial.
The OUT point of the first programme is set,
then the bottom part of the programme mark
changes to light blue.
(8) Repeat steps 4 to 7, then set the programme.
When the programme is set, the programme
mark changes to light blue.
You can set up to 20 programmes in
maximum.
124
(1)
(2)
, then press
(3)
(4)
(5)
(6)
(7)
(8)
1