Sony Handycam DCR-TRV40E Operating Instructions Manual page 127

Dubbing only desired scenes
– Digital program editing (on
tapes)
(2) Turn the SEL/PUSH EXEC dial to select
START, then select EXECUTE, then press the
dial.
Search for the beginning of the first
programme, then start dubbing.
The programme mark flashes.
The SEARCH indicator appears during
search, and the EDITING indicator appears
during edit on the screen.
The programme mark changes to light blue
after dubbing ends.
When dubbing ends, your camcorder and the
VCR automatically stop.
To stop dubbing during editing
Press x using the video operation buttons.
To end the Digital program editing
Your camcorder stops when the dubbing ends.
Then the display returns to VIDEO EDIT in the
menu settings.
Press MENU to end the Digital program editing.
You cannot record on the VCR when:
– The tape has run out.
– The write-protect tab on the cassette is set to
lock.
– The IR SETUP code is not correct. (when IR is
selected)
– The button to cancel recording pause is not
correct. (when IR is selected)
NOT READY appears on the LCD screen when:
– The programme to operate the Digital program
editing has not been made.
– i.LINK is selected but an i.LINK cable (DV
connecting cable) is not connected.
– The power of the connected VCR is not turned
on. (when you set i.LINK)
(2)
x
127