Recording A Moving Picture From External Equipment - Sony Handycam DCR-TRV40E Operating Instructions Manual

Recording pictures from tape as a
moving picture
Recording a moving picture
from external equipment
Before operation
Set DISPLAY in
(The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on
to see the desired programme.
The image of the other equipment is
displayed on the screen.
(3) Follow the procedure on page 186 from the
step 3 onwards at the point where you want
to start recording from.
Using the A/V connecting cable
VCR
: Signal flow/
If your TV or VCR has an S video jack
Pictures can be reproduced more faithfully by
using an S video cable (optional).
With this connection, you do not need to connect
the yellow (video) plug of the A/V connecting
cable.
Connect an S video cable (optional) to the S video
jacks of both your camcorder and the TV or VCR.
188
to LCD in the menu settings.
OUT
Yellow/
S VIDEO
VIDEO
AUDIO
Red/
(1)
(2)
(3)
White/
A/V connecting cable (supplied)/
S VIDEO
AUDIO/
VIDEO