Connecting Your Camcorder To A Computer Using The Usb Cable (For Macintosh Users); Raccordement Sur Un Ordinateur À L'aide Du Câble Usb (Pour Les Utilisateurs Macintosh) - Sony Handycam DCR-TRV60E Operating Instructions Manual

Sony operating instructions digital video camera recorder dcr-trv60e
Hide thumbs Also See for Handycam DCR-TRV60E:
Table of Contents

Advertisement

Connecting your
camcorder to a computer
using the USB cable
(For Macintosh users)
When connecting to a computer with
the USB cable
You must install a USB driver onto a computer
in order to connect your camcorder to the
computer's USB port. The USB driver can be
found on the CD-ROM supplied, along with the
application software required for viewing
images.
Recommended Macintosh
environment
Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS X
(v10.0/v10.1/v10.2) standard installation is
required.
However, note that the update to Mac OS 9.0/9.1
should be used for the following models.
•iMac with the Mac OS 8.6 standard installation
and a slot loading type CD-ROM drive
•iBook or Power Mac G4 with the Mac OS 8.6
standard installation
The USB port must be provided as standard.
QuickTime 3.0 or newer must be installed to play
back moving pictures.
Notes
•Operations are not guaranteed for the
Macintosh environment if you connect two or
more USB equipment to a single computer at
the same time, or when using a hub.
•Some equipment may not operate depending
on the type of USB equipment that is used
simultaneously.
•Operations are not guaranteed for all the
recommended computer environments
mentioned above.
•Macintosh and Mac OS, iBook, Power Mac or
QuickTime are trademarks of Apple Computer
Inc.
•All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies. Furthermore, "
and "®" are not mentioned in each case in this
manual.
216
Raccordement sur un
ordinateur à l'aide du
câble USB (pour les
utilisateurs Macintosh)
Lors du raccordement sur un
ordinateur à l'aide du câble USB
Vous devez installer un pilote USB sur
l'ordinateur pour raccorder le caméscope au port
USB de l'ordinateur. Le pilote USB se trouve sur
le CD-ROM fourni, ainsi que le logiciel
d'application requis pour visionner des images.
Environnement Macintosh
recommandé
Mac OS 8.5.1/8.6/9.0/9.1/9.2 ou Mac OS X
(v10.0/v10.1/v10.2). L'installation standard est
requise.
Notez toutefois qu'une mise à niveau Mac OS
9.0/9.1 doit être utilisée pour les modèles
suivants.
• iMac avec Mac OS 8.6 installé en standard et un
lecteur de CD-ROM intégré
• iBook ou Power Mac G4 avec Mac OS 8.6
installé en standard
Le port USB doit être fourni en standard.
QuickTime 3.0 ou une version ultérieure doit être
installée pour reproduire des images animées.
Remarques
• Le fonctionnement n'est pas garanti avec
l'environnement Macintosh si vous raccordez
deux appareils USB ou plus en même temps sur
un seul ordinateur ou si vous utilisez un
concentrateur.
• Certains appareils risquent de ne pas
fonctionner selon le type d'appareil USB utilisé
simultanément.
• Le fonctionnement n'est pas garanti pour tous
les environnements informatiques
recommandés mentionnés précédemment.
• Macintosh, Mac OS, iBook, Power Mac et
QuickTime sont des marques commerciales
d'Apple Computer Inc.
• Tous les autres noms de produits mentionnés
TM
"
ici sont des marques ou des marques déposées
de leurs sociétés respectives. En outre, «
« ® » ne sont pas mentionnés systématiquement
dans ce manuel.
TM
» et

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents