Sony Handycam DCR-TRV40E Operating Instructions Manual page 193

Recording edited pictures from a
tape as a moving picture
– Digital program editing (on
"Memory Stick"s)
Performing the programme
(Dubbing on a "Memory Stick")
(1) Turn the SEL/PUSH EXEC dial to select
VIDEO EDIT in the menu settings, then select
MEMORY, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select
START, then select EXECUTE, then press the
dial.
Search for the beginning of the first
programme, then start dubbing.
The programme mark flashes.
The SEARCH indicator appears during
search, and the EDITING indicator appears
during writing of data on your camcorder,
and REC appears during dubbing on the
screen.
The programme mark changes to light blue
after dubbing is complete.
When the dubbing ends, your camcorder
automatically stops.
To stop dubbing during editing
Press x using the video operation buttons.
The programme you made is recorded on a
"Memory Stick" up to the place where you
pressed x.
To end the Digital program editing
Your camcorder stops when the dubbing ends.
Then the display returns to VIDEO EDIT in the
menu settings.
Press MENU to end the Digital program editing.
NOT READY appears on the LCD screen when:
– The programme to operate the Digital program
editing has not been made.
– The "Memory Stick" is not inserted.
– The write-protect tab on the "Memory Stick" is
set to LOCK.
When "Memory Stick" does not have enough
space to record
LOW MEMORY appears on the screen. However,
you can record pictures up to the time indicated.
(1)
(2)
x
x
193