Recording Still Images On Tape - Tape Photo Recording - Sony Handycam DCR-TRV40E Operating Instructions Manual

Recording still images
on tape – Tape Photo
recording
You can record still images such as photographs
on tapes.
You can record about 510 images in the SP mode
and about 765 images in the LP mode on a 60-
minute tape.
(1) In the standby, set PHOTO REC in
TAPE in the menu settings (p. 253).
(2) Keep pressing PHOTO lightly until a still
image appears.
The CAPTURE indicator appears. Recording
does not start yet.
To change the still image, release PHOTO,
select a still image again, and then press and
hold PHOTO lightly.
(3) Press PHOTO deeper.
The still image on the screen is recorded for
about seven seconds. The sound during those
seven seconds is also recorded.
The still image is displayed on the screen until
recording is completed.
Recording images with the flash
For the details, see page 65.
Recording images with self-timer
(1) Set PHOTO REC in
settings (p. 253).
(2) Follow steps 1 and 3 on page 67.
to
to TAPE in the menu
(1)
(2)
(3)
2
3
(1)
(2)
CAPTURE
•••••••
69