Sony Handycam DCR-TRV40E Operating Instructions Manual page 254

Changing the default settings with the menu
Icon/item
VCR SET
HiFi SOUND
AUDIO MIX
A/VtDV OUT
NTSC PB
LCD/VF SET
LCD B.L.
LCD COLOUR
VF B.L.
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Notes on LCD B.L. and VF B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during recording.
•When you use power supplies other than the battery pack, BRIGHT is automatically selected.
Even if you adjust LCD B.L., LCD COLOUR and/or VF B.L.
The recorded picture will not be affected.
254
Mode Meaning
z STEREO To play back a stereo tape or dual sound track tape
with main and sub sound (p. 294)
1 To play back a stereo tape with the left sound or a
dual sound tape with main sound
2 To play back a stereo tape with the right sound or a
dual sound track tape with sub sound
—— To adjust the balance between the stereo 1 and stereo
2 (p. 139)
z OFF To output digital images and sound in analog format
using your camcorder
ON To output analog images and sound in digital format
using your camcorder (p. 245)
z ON PAL TV To play back a tape recorded in the NTSC colour
system on a PAL system TV.
NTSC 4.43 To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode.
z BRT NORMAL To set the brightness on the LCD screen to normal
BRIGHT To brighten the LCD screen
—— To adjust the colour on the LCD screen, turn the
SEL/PUSH EXE dial.
z BRT NORMAL To set the brightness on the viewfinder screen to
normal
BRIGHT To brighten the viewfinder screen
ST1
To get low-
intensity
ST2
To get high-
intensity
POWER
switch
VCR
VCR
VCR
VCR
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK