Recording still images on
"Memory Stick"s
– Memory Photo recording
You can record still images on "Memory Stick"s.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY/
NETWORK (DCR-TRV50E only). Make sure
that the LOCK switch is set to the left (unlock)
position.
(2) Press PHOTO lightly. The green z mark stops
flashing, then lights up. The brightness of the
image and focus are adjusted, being targeted
for the middle of the image and are fixed.
Recording does not start yet.
(3) Press PHOTO deeper.
The still image will be displayed after the
shutter sounds.
Recording is complete when the bar scroll
indicator disappears.
The image when you pressed PHOTO deeper
will be recorded on the "Memory Stick."
1
LOCK
(1)
(2)
z
(3)
2
3
VCR
OFF(CHG)
CAMERA
MEMORY/
NETWORK
[a]: Number of recorded images/
[b]: Approximate number of images that can
be recorded on the "Memory Stick"/
[a][b]
SFN
1 / 12
1360
PLAY
INDEX
FN
SFN
1360
PLAY
INDEX
FN
161