Sony Handycam DCR-TRV40E Operating Instructions Manual page 227

Connecting your camcorder to
your computer using the USB
cable – For Windows users
(8) Set the POWER switch to VCR.
(9) Select USB STREAM in
menu settings (p. 259).
(10)With the CD-ROM inserted, connect the USB
jack of the camcorder and computer using
the USB cable supplied with your
camcorder.
Your computer recognises the camcorder,
and the Windows Add Hardware Wizard
starts.
(11)Follow the on-screen messages so that the
Add Hardware Wizard recognises that the
USB drivers have been installed. The Add
Hardware Wizard starts three times because
three different USB drivers are installed. Be
sure to allow the installation to complete
without interrupting it.
For Windows 2000 Professional, Windows XP
Home Edition/Professional users
(12)After the "File Needed" screen appears.
Open "Browse..." t "My Computer" t
"ImageMixer" t "Sonyhcb.sys", and click
"OK".
(8)
to ON in the
(9)
(10)
(USB) jack/
Push into the end/
(11)
(12)
USB connector/
USB cable (supplied)/
t
t t
227