The Date And Time - Sony DCR-TRV16 Operating Instructions Manual

Step 2 Setting the date and time
Set the date and time when you use your camcorder for the first time. "CLOCK SET"
will be displayed each time that you set the POWER switch to CAMERA or MEMORY
(except DCR-TRVI6} unless you set tile date and time.
If you do not use your cameorder for about four months, tile date and time settings
may be cleared from memory (bars may appear) because tile built in rechargeable
battery in your camcorder will have been discharged (p. 20,3).
Set the year, then tile month, the day, the hour and then tile minute, in that order.
(1) Set the POWER switch to CAMERA or MEMORY (except DCR-TRVI6), then
press MENU to display the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select [], then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal, The clock starts to move.
(7) Press MENU to make the menu settings disappear.
if)
3
23