Sony DCR-TRV16 Operating Instructions Manual page 37

Checking recordings
- END SEARCHIEDITSEARCHIRec Review
You can use these buttons lo check the recorded picture or shoot so that the transition
between the last recorded scene and the next scene you record is smooth.
-- EDffSEARCH 4-
J
}
tD
8
You can go to the end of the recorded section after you record.
Press END SEARCH in tile standby mode.
The last five seconds of the recorded section are played back and your camcorder
returns to the standby mode. You can monitor the sound from the speaker or
headphones.
You can search for the next recording start point.
Hold down the /+ side of EDITSEARCH in the standby mode. The recorded portion is
played back.
: To go backward
+ : To go forward
Release EDITSEARCH to stop playback. If you press START/STOP, recording begins
from the point you released EDITSEARCH. You cannot monitor the sound.
You can check the last recorded section.
Press the side of EDITSEARCH momentarily in the standby mode.
The section you have stopped most recently will be played back for a few seconds, and
then your camcorder will return to the standby mode. You can monitor the sound from
the speaker or headphones.
End search function
When you use a cassetle without cassette memory, the end search function does not
work once you qlect the cassette aher you have recorded on the tape. If you use a
cassette with cassette memory, the end search function works even once you eject the
cassette.
If a tape has a blank portion between recorded portions
The end search function may not work correctly.
37