Searching For Aphoto Photo - Sony DCR-TRV16 Operating Instructions Manual

Searching for a photo - PHOTO SEARCHIPHOTO SCAN
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in _ to OFF in the menu settings (p. 181).
(3) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SEARCH indicator appears.
The indicator changes as follows:
_* DATE SEARCH -+ PHOTO SEARCH -+ PHOTO SCAN -+ no indicator
/
(4) Press _ or _ on the Remote Commander to select the photo for playback.
Each time you press _ or _ your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
To stop searching
Press m.
(1) Set the POWER switch to VCR.
(2) Press SEARCH
MODE on the Remote Commander repeatedly until the
PHOTO SCAN indicator appears.
The indicator changes as follows:
TITLE SEARCH* -+ DATE SEARCH -+ PHOTO SEARCH
no indicator q PHOTO SCAN
* TITLE SEARCH is displayed when CM SEARCH is set to ON in the menu
settings.
(3) Press _ or _ on the Remote Commander.
Each photo is played back for about five seconds automatically.
To stop scanning
Press m.
If a tape has a blank portion between recorded portions
Tile photo search/photo scan function may not work correctly.
The available number of photos that can be searched using the cassette memory
Tile available number is up to 12 photos. However, you can search 13 photos or more
74
using the photo scan function.