Sony DCR-TRV16 Operating Instructions Manual page 81

Dubbing only desired scenes - Digital program editing (on tapes)
(2)Setting the modes to cancel the recording pause on the VCR
(_) Turn the SEL/PUSH EXEC dial to select PAUSEMODE, then press the dial.
@ Turn the SEL/PUSH EXEC dial to select the mode to cancel recording pause
on the VCR, then press the dial.
Refor to the operating instructions of your VCR.
v_DEo EOrT OG_5506
Ha _EST
_CUT-IN_
_CUTJjU_-
_R ET P pAUSE
I ..... I
IM_NUIEND
Buttons to cancel recording pause on the VCR
The buttons vary depending on your VCR. To cancel recording pause:
Select PAUSE if the button to cancel recording pause is II.
Select REC if the button to cancel recording pause is O.
Select PB if the button to cancel recording pause is I_,-.
(3) Setting your camcorder and the VCR to face each other
Locate tile irlfrared rays emitter of your camcorder and face it towards tile remote
sensor of the VCR.
Set the devices about 30 em (12 in.} apart, and remove any obstacles between the
devices.
Infrared rays emitter
VCR
Remote sensor
A/V connecting cable (supplied)
81