Sony DCR-TRV16 Operating Instructions Manual page 39

Playing back a tape
Press DISPLAY on your camcorder or the Remote Commander. The indicators appear
on the screen.
To make tile indicators disappear, press DISPLAY again.
DATA CODE
DISPLAY
3
g
t
€o
About date/time and various settings
Use the Remote Commander for this operation.
In addition to images, your camcorder automatically records the recording data,
including date/time and various settings on the tape (data code).
@ Set the POWER switch to VCR, then play back a tape.
@ Press DATA CODE on the Remote Commander.
The display changes as follows:
date/time -+ various settings (SteadyShot, white balance, gain, shutter speed, aperture
value, exposure modo) -+ no indicator
Date/time
[a] Tape counter
[b] SteadySbot OFF
[¢] Exposure mode
[d] White balance
[el Gain
[f] Shutter speed
[g] Aperture value
Various settings
[_S0min _o:oo:2a:o1_
[al
/_ ------'q-- [bl
[c] r iil
To not display various settings
Set DATA CODE to DATE in the menu settings (p. 184).
The display changes as follows when you press DATA CODE on the Remote
Commander:
date/time *-+ no indicator
39