Sony DCR-TRV16 Operating Instructions Manual page 78

Dubbing only desired scenes
- Digital program editing (on tapes)
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on "Memory Stick"s (except DCR-TRVI6). See page 132 for
more information.
Unwanted scene Unwanted scene
t Switch the o rder I
Before operating the Digital program editing on tapes
recorded on other equipment
Step 1 Connecting the VCR (p. 78).
Step 2 Setting the VCR for operation.
Using the A/V connecting cable (p. 79)
Using the i.LINK cable (DV connecting cable) (p. 83)
Step 3 Adjusting the synchronization of the VCR (p. 84).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the Digital program editing function on tapes recorded
on other equipment
Operation 1 Making a program (p. 86).
Operation 2 Performing the program (dubbing a tapo) (p. 88).
Note
When editing digital video on tapes, the operation signals cannot be sent with
U LANC.
You can connect both the A/V connecting cable and the i.LINK cable (DV connecting
cable}.
When you use the A/V connecting cable, connect the devices as illustrated on page 75.
When you use the LLINK cable (DV connecting cable), connect the devices as illustrated
on page 76.
If you connectusing the i.LINKcable (DV connecting cable)
With a digital-to-digital connection, video and audio signals are transmitted in digital
form for high-quality editing.
78