Sony DCR-TRV16 Operating Instructions Manual page 124

Superimposing a still image in the "Memory Stick" on an image
- MEMORY MIX
2
Still image
4 5 6
124
To change the still image to superimpose
Do either of tile following:
Press MEMORY /÷ before step 6.
Press the SEL/PUSI 1 EXEC dial be[ore step 6, and repeat the procedure from step 4.
To change the mode setting
Press tile SEL/PUSH EXEC dial before step 6, and repeat tile procedure fi'om step 4.
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
• You cannot use tile MEMORY
MIX function for moving pictures recorded on
"Memo W Stick"s.
• When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
Image data modified on your computer or shot with other equipment
You may not be able to play back modified images with your camcorder.
During recording
You cannot change the mode setting.
When recording images on a "Memory Stick" using the MEMORY MIX function
Tile PROGRAM AE function does not work. (The indicator flashes.)
The "Memory Stick" supplied with your camcorder is already stored with 20
images
For M. CltROM: 18 images (such as a fi'ame) I00-0001 to 100-0018
For C. CHROM: two images (such as a background) 100-0019 to 100-0020
Sample images
Sample images stored in the "Memory Stick" supplied with your camcorder are
protected (p. 148).