Audio Dubbing - Sony DCR-TRV16 Operating Instructions Manual

Audio dubbing
If you connect audio equipment, you can add sound to your recorded tape already
recorded in the 12-bit mode by specifying the start and end points. The original sound
will not be erased.
Select one of the following connections to add audio.
MIC
(PLUG IN
POWER)
: Signal flow
Microphone (optional)
You can check recorded picture and sound by connecting your camcorder to a TV with
tile A/V connecting cable.
Recorded sound is not output from the speaker. Check the sound by using a TV or
headphones.
Intelligent accessory shoe
Microphone {optional)
94