Sony DCR-TRV16 Operating Instructions Manual page 107

Using a "Memory Stick" - Introduction
You can select Ihe image quality mode in still image recording.
The default setting is FINE. (DCR-TRVI8 only).
The default setting is SUPER FINE. (DCR-TRV25/TRV27 only).
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press MENU, then select STILL SET in _E] with the SEL/PUSH EXEC dial
(p. 179}.
(3) Turn the SEE/PUSH EXEC dial to select QUALITY, then press the dial.
(4) Turn the SEE/PUSH EXEC dial to select the desired image quality, then press
the dial.
MENU
3
o
o
107