Sony DCR-TRV16 Operating Instructions Manual page 109

Using a "Memory Stick" - Introduction
Still images:
DCR-TRV25/TRV27: You can select either of two image sizes.
1152 × 864 or 640 × 480 (When the POWER switch is set to
CAMERA or VCR, the image size is automatically set to 640 ×
480.)
The default setting is 1152 × 864.
DCR-TRVI8: 840 x 480 only
Moving pictures:
You can select either of two picture sizes.
320 x 240 or 160 x 112
The default setting is 320 × 240.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to k_5_;_¢:_l_J:K_
the left (unlock) position.
(2) Press MENU, then select STILL SET (still image) or MOVIE SET (moving
picture) in D with the SEE/PUSH EXEC dial (p. 179). o3
(3) Turn
the SEE/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(4) Turn the SEE/PUSH EXEC dial to select the desired image size, then press the _"
dial. o
The indicator changes as follows: "_
Stillimages*: 1_152 _ _840 _"
Movingpictures: _3320 _ _-_180 R
STILL SET* MOVIE SET
STILL SET*
MOVIE SET
MENU
* DCR-TRV25/TRV27 only
109