Sony DCR-TRV16 Operating Instructions Manual page 87

Dubbing only desired scenes - Digital program editing (on tapes)
Erasing the program you have set
Erase OUT first and then IN fl'om the last set program.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
The last set program mark flashes, then the setting is canceled.
To cancel erasing
Select RETURN in step 2.
Erasing
all programs
(1) Select VIDEO EDIT in the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select TAPE, then press the dial (except
DCR-TRV16).
(3) Select ERASE ALL in the menu settings. Turn the SEL/PUSEI EXEC dial to
select EXECUTE, then press the dial.
All the program marks flash, then the settings are canceled.
To cancel erasing all programs
Select RETURN in step 3.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
Note
You cannot operate recording during Digital program editing.
On a blank portion of the tape
You cannot set IN or OUT on blank portions of the tape.
If there is a blank portion between IN and OUT on the tape
Tbe total time code may not be displayed correctly.
87