Remote Commander - Sony Handycam DCR-PC101 Operating Instructions Manual

Identifying the parts and controls

Remote Commander

Buttons that share the same name on the camcorder and Remote Commander share the
same function.
1 PHOTO button (p. 45, 48, 123)
2 DISPLAY button (p. 39)
3 SEARCH MODE button (p. 77, 78, 80)
4 ./> buttons (p. 77, 78, 80)
5 Video control buttons (p. 41)
To prepare the Remote Commander
Insert two size AA (R6) batteries by matching the + and – polarities on the batteries to
the + – marks inside the battery compartment.
Notes on the Remote Commander
•Point the remote sensor away from strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Commander may not function properly.
•Your camcorder works in the commander mode VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from other Sony VCRs to avoid remote
control misoperation. If you use another Sony VCR in the Commander mode VTR 2,
we recommend changing the commander mode or covering the sensor of the VCR
with black paper.
1
2
3
4
5
6
7
8
9
q;
6 Transmitter
Point toward the remote sensor to
control your camcorder after turning on
your camcorder.
7 ZERO SET MEMORY button (p. 76)
8 START/STOP button (p. 24)
9 DATA CODE button (p. 39)
q; Power zoom button (p. 29)
221