Playback - Basics; Playing Back A Tape - Sony Handycam DCR-PC101 Operating Instructions Manual

— Playback – Basics —

Playing back a tape

You can monitor the recorded tape etc. on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder. You can also control playback
using the Remote Commander supplied with your camcorder.
(1) Prepare the power source and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button.
(3) Press OPEN to open the LCD panel.
(4) Press
(5) Press
(6) Adjust the volume following the steps below.
(7) Press
3
To return to FN
Press EXIT.
To stop playback
Press
38
to rewind the tape.
to start playback.
1 Press FN to display PAGE1.
2 Press VOL. The screen to adjust volume appears.
3 Press –/+ to adjust the volume.
– : to decrease the volume
+ : to increase the volume
OK to return to PAGE1.
4
.
5
1
2
POWER LOCK
6
FN
– VOL
The bar indicator
OK
+