Erasing All The Data In Cassette Memory - Sony Handycam DCR-PC101 Operating Instructions Manual

Labeling a cassette
If you set the write-protect tab to lock
You cannot label the cassette. Slide the write-protect tab to release the write protection.
If the cassette has too many index signals
You may not be able to label a cassette because the memory is full. In this case, delete
data you do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also appear.
When the "-----" indicator has fewer than 10 spaces
The cassette memory is full.
The "-----" indicates the number of characters you can select for the label.
To erase the title
Press C. The last character is erased.
To enter a space
Press c.
To enter the same character on the same button in succession
Press c to move the cursor to the next position, and enter the character.

Erasing all the data in cassette memory

You can erase all the data in cassette memory at once.
(1) Set the POWER switch to CAMERA or VCR.
(2) Press FN to display PAGE1.
(3) Press MENU, then select ERASE ALL in
(4) Select OK with r/R, then press EXEC.
(5) Select EXECUTE with r/R, and then press EXEC. ERASING flashes on the
To return to FN
Press EXIT.
To cancel deleting
Select RETURN in step 5, then press EXEC.
112
OK changes to EXECUTE.
screen. Once deleting is completed, COMPLETE is displayed.
, then press EXEC (p. 190).