Sony Handycam DCR-PC101 Operating Instructions Manual page 58

Using special effects – Digital effect
(1) Set the POWER switch to CAMERA, then press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a desired digital effect mode appears.
(3) Press a desired digital effect mode. In STILL and LUMI., the still image is
(4) Press –/+ to adjust the effect.
Items to adjust
STILL
FLASH
LUMI.
TRAIL
SLOW SHTR
OLD MOVIE
(5) Press
1
To return to FN
Press EXIT.
To cancel the digital effect
Press
58
stored in memory.
The rate of the still image you want to superimpose on the moving
picture
The interval of flash motion
The color scheme of the area in the still image which is to be swapped
with a moving picture
The vanishing time of the incidental image
Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
No adjustment necessary
OK to return to PAGE2.
FN
OFF to return to PAGE2.
2~4
DIG
DIG EFFT
EFFT
SLOW
SHTR
STILL
The bar appears when setting following
digital effect modes: STILL, FLASH,
LUMI., TRAIL.
DIG EFFT
OFF OK
OLD
MOVIE
FLASH LUMI. TRAIL
OFF OK
– LUMI. +