Sony Handycam DCR-PC101 Operating Instructions Manual page 117

Using a "Memory Stick" – Introduction
To return to FN
Press EXIT.
To execute settings
Press OK.
To cancel settings
Press OFF to return to PAGE1/PAGE2/PAGE3.
Notes
•When using the touch panel, press operation buttons with your thumb supporting the
LCD screen from the back side of it or press those buttons lightly with your index
finger.
•Do not press them with sharp-pointed objects such as a pen.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
•When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 211).
•When the LCD screen gets dirty, use the supplied cleaning cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
Touch panel
You can operate with the touch panel using the viewfinder (p. 70).
Press FN to display the following buttons:
In memory camera
PAGE1
PAGE2
PAGE3
In memory playback
PAGE1
PAGE2
PAGE3
SPOT FOCUS, MENU, PLAY, INDEX, EXPOSURE, SPOT METER
SELFTIMER, PLAY, INDEX, MEM MIX
LCD BRT, PLAY, INDEX, VOL
MENU, CAM, INDEX, DELETE,
PB ZOOM, CAM, INDEX, DATA CODE,
LCD BRT, CAM, INDEX, VOL,
,
+ –
+ , –
, –
+
117