Viewing A Moving Picture - Mpeg Movie Playback - Sony Handycam DCR-PC101 Operating Instructions Manual

Viewing a moving picture
– MPEG movie playback
You can play back moving pictures recorded on a "Memory Stick." You can also play
back six images including still images in order of recording on a "Memory Stick" at a
time by selecting the index screen.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press PLAY. The last recorded image is displayed.
(3) Press –/+ to select the desired moving pictures.
– : To see the previous picture
+ : To see the next picture
(4) Press MPEG N X to start playback.
(5) Adjust the volume following the steps below.
1 Press FN and select PAGE3.
2 Press VOL. The screen to adjust volume appears.
3 Press –/+ to adjust the volume.
– : to decrease the volume.
+: to increase the volume.
4 Press
To stop MPEG movie playback
Press MPEG N X.
Note
You may not be able to play back images with your camcorder:
– When playing back image data modified on your computer.
– When playing back image data shot with other equipment.
To play back recorded images on a TV screen
•Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before operation.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
Moving picture
You can select moving pictures also with –/+ on PAGE1/PAGE2/PAGE3.
OK.
2
PLAY
151