Using The Remote Commander - Sony Handycam CCD-F501 Operating Instructions Manual

Using the Remote Commander
By using the Remote Commander, you can record yourself with your friends
or family, or conveniently control the playback of your tape from a distance.
1 Insert two size AA (R6) batteries with
correct polarity.
2 Set REMOTE COMMANDER ON/OFF
on the camcorder to ON.
3 Set POWER on the camcorder as follows:
—When recording,1) press the small green
button and slide POWER to CAMERA, 2) coe) OFF
push the cover of the red button up until it
snaps into STANDBY.
—When playing back, slide POWER to VTR.
4 Point the Commander to the remote
sensor of the camcorder and press
the appropriate button on the
Commander.
(Maximum distance and
angle for remote control}
16 Basic Camera Operation