Sony Handycam DCR-PC101 Operating Instructions Manual page 134

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX
Recording a superimposed image to "Memory Stick" as a still
image
Before operation
Insert a recorded "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY.
(2) In standby, press FN and select PAGE2.
(3) Press MEM MIX. The last image recorded on the "Memory Stick" appears on
(4) Press –/+ on the right lower corner of the screen to select the still image which
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the screen to adjust the effect, then press
(7) Press EXIT to return to FN.
(8) Press PHOTO deeper to start recording. Recording is complete when the bar
134
Make sure that the LOCK switch is set to the right (unlock) position.
the left corner of the screen.
you want to superimpose.
– : to see the previous image
+: to see the next image
OK to return to PAGE2.
M. CHROM – The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI – The color (bright) scheme of the area in the still image which is
to be swapped with a moving image
C. CHROM – The color (blue) scheme of the area in the moving image which
is to be swapped with a still image
The fewer bars there are on the screen, the stronger the effect.
scroll indicator disappears. The image displayed on the screen when you
pressed PHOTO deeper will be recorded on the "Memory Stick."