JVC Connected Cam GY-HC900CHU Instructions Manual page 147

o Server
For setting the server name ("mystation.com", etc.)
or the IP address ("192.168.0.1", etc.) of the FTP
server.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
o Port
Enter the FTP server port number to use using an
integer between 1 and 65535.
The default value varies with the protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21, ZIXI:
2088)
o Dir. Path
Enter the path name for the directory to upload to
("/pub", "/home/user", etc.)
* Enter not more than 127 characters.
o Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
o Stream ID
For configuring the stream ID that is registered at
the distribution destination.
The default value varies with the product model.
* Enter not more than 63 characters.
Memo :
This item is selectable only when [Type] is set to
0
"ZIXI".
o Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters. Enter not
more than 127 characters for ZIXI setting.
o PASV Mode
For setting whether to set the communication mode
used for file transfer to the passive mode.
Set to "On" if the camera is inside a firewall, and a
connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Memo :
When [Protocol] is set to "SFTP", this item
0
appears as "---" and cannot be selected.
147
Network Menu