Focus Operation - JVC Connected Cam GY-HC900CHU Instructions Manual

Focus Operation

Adjusting the Focus
1 Turn the focus ring to adjust the focus.
Memo :
Using the Focus Assist or Expanded Focus
0
function makes it easier to focus.
(A P58 [Focus Assist Function] )
(A P58 [Expanded Focus Function] )
Focus Assist Function
When the user button assigned with "Focus
0
Assist" is pressed, the focused area is displayed
in color. This enables easy and accurate
focusing.
Select the color (blue, red or green) in the menu.
0
Memo :
When [LCD/VF] B [Shooting Assist] B [Focus
0
Assist] B [Type] is set to "ACCU-Focus", the
depth of field becomes shallower to enable
easier focusing.
(A P126 [ Focus Assist ] )
The "ACCU-Focus" function switches
0
automatically to "Off" after about 10 seconds.
Select the display color in [LCD/VF] B [Shooting
0
Assist] B [Focus Assist]B[Color].
(A P126 [ Color ] )
If you use the zebra function and the Focus
0
Assist function at the same time, it may be
difficult to see the effect of the Focus Assist. In
this case, turn off the zebra function.
Focus Assist + Function
You can operate the Focus Assist and
0
Expanded Focus functions simultaneously by
pressing the user button assigned with "Focus
Assist +".
Memo :
"Expanded Focus" is displayed during the
0
"Focus Assist +" operation regardless of the
setting in [Camera Function] B [User Switch
Set] B [Expanded Focus].
58
Focus Operation
Expanded Focus Function
You can magnify the preferred area by pressing the
user button assigned with "Expanded Focus";
doing so enables precise focus to be established
easily.
1 When the user button that is assigned with
"Expanded Focus" is pressed
The center area of the screen is enlarged for
0
the first time.
For subsequent operation of the button, the
0
area at which the operation was last
performed will be enlarged.
.
2 Use the cross-shaped button (JKH I) to
magnify the preferred area.
The portion that is being magnified is
0
displayed at the lower right corner of the
screen.
3 Press the [CANCEL/RESET] button to
cancel the setting.
Memo :
The display of the enlarged screen is dot by dot
0
equivalent.
To set the operation when the button is pressed,
0
go to [Camera Function] B [User Switch Set] B
[Expanded Focus].
(A P114 [ Expanded Focus ] )
Pressing and holding the Set button (R) resets
0
the position of magnification.
This function can be used together with the
0
Focus Assist function.
Magnifying an image does not alter the size of
0
the recorded image.
If the "Expanded Focus" function is assigned to
0
the cross-shaped button, the cross-shaped
button cannot be used as user button while the
area is being magnified.
This function is unavailable when [System] B
0
[Record Set] B [Record Format] B [System] is
set to "SD".
When the display screen is turned off, the
0
magnified area at the bottom right of the screen
will not be displayed.