JVC Connected Cam GY-HC900CHU Instructions Manual page 138

IFB/RET Monitor... 0
9 CH1(/2)
For configuring the output from the [PHONE]
terminal during IFB Return over IP of each channel.
Auto:
0
Outputs upon mixing the IFB/Return over IP
audio with the microphone audio when IFB/
Return over IP audio input is detected. Outputs
only the microphone audio when IFB/Return
over IP audio input is not detected.
IFB/RET Only:
0
Outputs only the IFB/Return over IP audio at all
times.
Off:
0
IFB/Return over IP audio is not output.
[Setting Values: Auto, IFB/RET Only, ROff]
Memo :
To enable different settings for CH1 and CH2 of
0
[IFB/RET Monitor], configure [PHONE] output to
"Stereo".
9 IFB/RET Audio ALC
For configuring the audio ALC operation during
IFB/Return over IP.
[Setting Values: ROn, Off]
Memo :
[IFB/RET Audio ALC] is an automatic level
0
adjustment function that enables clear IFB/
Return over IP audio.
9 ALC Level
For setting the IFB/Return over IP audio level
during ALC operation.
High:
0
Automatically adjusts the IFB/Return over IP
audio to maximum sound level.
Middle:
0
Automatically adjusts the IFB/Return over IP
audio to middle sound level.
Low:
0
Automatically adjusts the IFB/Return over IP
audio to low sound level.
[Setting Values: High, RMiddle, Low]
138
A/V Set Menu
Memo :
If the IFB/Return over IP audio is too loud, set
0
this item to "Low". If the sound is still loud even
after setting to "Low", set [IFB/RET Audio ALC]
to "Off".
Caution :
The IFB/Return over IP audio may not be audible if
all the following conditions are true, please readjust
each setting accordingly.
[IFB/RET Audio ALC] is set to "Off"
0
[IFB/RET Monitor]/[CH1][CH2] is set to "Auto"
0
The audio input of IFB/Return over IP is low
0