JVC Connected Cam GY-HC900CHU Instructions Manual page 134

SD Aspect
For setting the style of displaying images with a
16:9 aspect ratio on a 4:3 aspect ratio screen.
Side Cut:
0
Displays image with the left and right sides cut
off.
Letter:
0
Displays as a wide image with the top and
bottom blackened.
Squeeze:
0
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter, RSqueeze]
Memo :
When [Record Format] B [System] is set to
0
"SD", and [Record Format] B [SD Aspect] is set
to "4:3", "---" is displayed and selection is
disabled. 2
(A P151 [ System ] )
[System] B [Record Set] B [Record Format] B
0
[System] is set to "SD", "Squeeze" and "Letter"
can be selected. 2
SD Set Up
For selecting whether to add a setup signal to the
video signal output from the [VIDEO OUT] terminal.
Setup signals are added when "7.5%" is selected.
[Setting Values: 7.5%, R0.0%]
Memo :
Depending on the menu settings of the camera
0
recorder and the condition of the cable
connected to it, the setup signal setting may be
fixed at "0.0%". "0.0%" is displayed in gray in this
case.
When [System] B [Record Set] B [Record
0
Format]B[Frame Rate] is set to "50p" or "50i",
"---" is displayed and selection is disabled.
134
A/V Set Menu
Genlock Input
For selecting the input destination of video
synchronizing signals.
SDI IN:
0
Inputs video synchronizing signals from the [HD/
SD SDI IN] terminal.
Adapter:
0
Inputs video synchronizing signals from the
adapter connected to the accessory connection
terminal (68 pins) on the rear of the camera
recorder.
GENLOCK:
0
Inputs video synchronizing signals from the
[GENLOCK] terminal.
[Setting Values: SDI IN, Adapter, RGENLOCK]
Memo :
When "HD(SDI In)" or "SD(SDI In)" 2 is
0
selected in [System], "SDI IN" is displayed and
selection is disabled.
Genlock Adjust...
Adjusts the H Phase of the camera recorder's video
signals with respect to the input synchronizing
signals.
9 SD-SDI H Phase
Adjusts the H Phase of the camera recorder's SD-
SDI signal with respect to the external
synchronizing signal input to the terminal set in the
[Genlock Input] item.
[Setting Values: -373 to +373] (R 0)
Memo :
When there is no SD video output from the [SDI
0
OUT] terminal, "---" is displayed and selection is
disabled.
9 HD-SDI H Phase
Adjusts the H Phase of the camera recorder's HD-
SDI signal with respect to the external
synchronizing signal input to the terminal set in the
[Genlock Input] item.
[Setting Values: -1024 to +1023] (R 0)
Memo :
When there is no HD video output from the [SDI
0
OUT] terminal, "---" is displayed and selection is
disabled.