Setting The Gain - JVC Connected Cam GY-HC900CHU Instructions Manual

Setting the Gain

This function electrically boosts the light sensitivity
when there is insufficient illumination on the object.
You can set the gain of the video amplifier
according to the brightness of the object. Select the
setting mode according to your shooting
conditions.
.
Manual Gain Mode (Manual Gain
Switching)
1 Set Full Auto mode to off using the user
button assigned with "Full Auto".
Select the gain level of the video amplifier
0
using the [GAIN L/M/H] selection switch on
the camera recorder.
The gain level appears on the screen.
0
SDI IN
282min
100min 1080 /30p
50min
COMPRESS
ITU709
1 /64
ND AE ±
0
1 / 60
F2.8
.
The default positions of the switch are as
0
follows.
[L] : 0 dB
[M] : 6dB
[H] : 12dB
2 Select [GAIN L/M/H] that is not set to "AGC"
to switch to the Manual Gain mode.
Memo :
You can change the gain value of each position
0
in the menu. Increasing the sensitivity causes
the screen to appear grainier.
The camera recorder switches to the Auto Gain
0
mode when the gain value is set to "AGC".
(A P110 [GAIN L, GAIN M, GAIN H] )
00: 00: 00.00
5 . 6f t
12 :34 : 56
K
ISO B 5600
102400
Automatic Gain Mode (Automatic Gain
Adjustment)
1 Set Full Auto mode to off using the user
button assigned with "Full Auto".
2 Set [Camera Function] B [GAIN L]/[GAIN
M]/[GAIN H] to "AGC".
(A P110 [GAIN L, GAIN M, GAIN H] )
If an item specified with "AGC" is selected using
the [GAIN L/M/H] gain switch, the Auto Gain
Adjustment mode is enabled and the gain of the
video amplifier is automatically set according to
the brightness of the subject.
Memo :
Use the user button assigned with "Full Auto" to
0
enter the Full Auto mode also activates the Auto
Gain mode. In this case, the Iris, Shutter and
White Balance also enter into Auto mode
forcibly.
The gain operation during Full Auto mode can
0
be configured in [Camera Function] B [Full
Auto] B [Gain].
The upper limit of the gain setting value during
0
AGC operation can be set in [Camera
Function] B [AGC Limit].
(A P110 [ AGC Limit ] )
While in the Auto Gain mode, and [AE Lock] is
0
set to "AE" or "AE/FAW", a
the left side of the gain value during lock
operation.
icon appears on
61
Setting the Gain