JVC Connected Cam GY-HC900CHU Instructions Manual page 123

AWB Paint
For adjusting the R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to "[Adjusting the White Balance]
(A P 63)".
Increase the number:
0
Strengthens the red/blue.
Decrease the number:
0
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Memo :
This item is selectable when the [WHT.BAL]
0
switch is set to "A" or "B". When "PRST" is set,
this item appears as "---" and cannot be
selected.
Different values can be specified for "A" and "B".
0
When [Clear Paint After AWB] is set to "On",
0
pressing the user button that is assigned with the
"AWB" function to readjust the white balance
switches the R and B values automatically to
"0".
Clear Paint After AWB
For specifying whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
On:
0
Sets the [AWB Paint] (R value and B value)
settings to "0" after executing AWB (Auto White
Balance).
Off:
0
Does not change the [AWB Paint] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values: ROn, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
Increase the number:
0
Strengthens the red/blue.
Decrease the number:
0
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Camera Process Menu
123