Return Over Ip Item 0 - JVC Connected Cam GY-HC900CHU Instructions Manual

o FEC Matrix 0
For setting the amount of FEC (Forward Error
Correction) overhead for configuring
SMPTE2022-1.
(A P215 [Setting the FEC Matrix 0] )
Memo :
This item is selectable only when [SMPTE
0
2022-1 FEC] is set to "On".
Resolution
For setting the resolution of the video image during
live distribution.
The available options vary according to the settings
for [WResolution] and [WFrame Rate] under
[Record Format].
W Resolution
1920x1080 1920x1080, 1280x720,
640x360 2,
720x480 2 (U model)
720x576 2 (E model)
1280x720 1280x720,
640x360 2
720x480 2 (U 720x480 2
model)
720x576 2 (E 720x576 2
model)
Memo :
The setting cannot be changed during live
0
streaming (when [Live Streaming] set to "On").
The Aspect Ratio for the live streaming image is
0
fixed to "16:9".
Frame Rate
For setting the frame rate of the video image during
live distribution.
The options vary according to the settings of [Live
Streaming Set] B [Resolution] and the [WFrame
Rate] settings under [Record Format].
W Frame Rate
60p, 60i 60p, 60i, 30p
50p, 50i 50p, 50i, 25p
30p 30p
25p 25p
Memo :
The setting cannot be changed during live
0
streaming (when live streaming is configured to
"On").
Setting Value
Setting Value
Bit Rate
For setting the encode bitrate of the video image
during live distribution.
The selectable options vary according to the
settings in [Live Streaming Set] B [Resolution] and
[Bit Rate].
For details on the settings, please refer to
[Distributable [Record Format] and [Live Streaming
Set] Combinations] (A P 212).
Memo :
The setting cannot be changed during live
0
streaming (when [Live Streaming] set to "On").
Depending on the type of network adapter used
0
and the connection, images and audio sound
during live streaming may be choppy.

Return over IP Item 0

Return over IP
For configuring Return over IP to On/Off.
[Setting Values: On, ROff]
Server
For selecting the source server for sending out
Return over IP audio/video.
[Setting Values: RServer1, Server2, Server3,
Server4]
Memo :
The setting cannot be changed while Return
0
over IP is operating (when [Return over IP] is set
to "On").
9 Return Server
For configuring the source server for sending out
Return over IP audio/video.
Memo :
The setting cannot be changed while Return
0
over IP is operating (when [Return over IP] is set
to "On").
9 Server1, Server2, Server3, Server4
* The name that is set in [Alias] is displayed
individually.
143
Network Menu