Operating Standards; Unit Specifications - Thermo Scientific TSX Series Installation And Operation Manual

Operating Standards

6 Operating
Standards

6.1 Unit Specifications

Table 2. Unit Specifications
Rated
Model
Voltage
23A / 23Y 115 V
23D / 23Z 208-230 V 2.5 A
23V 208-230 V 2.5 A
30A / 30Y 115 V
30D / 30Z 208-230 V 3.0 A
30V 208-230 V 3.0 A
8 TSX -20°C Laboratory and Enzyme Freezers
The freezers described in this manual are classified for use as stationary
equipment in a Pollution Degree 2 and Overvoltage Category II environment.
These units are designed to operate under the following environmental
conditions:
• Indoor use
• Altitude up to 2000 m (6512 feet)
• Maximum relative humidity 60% for temperatures from 15 to 32°C
(59 to 90°F).
• Main supply voltage fluctuations not to exceed 10% of the nominal
voltage.
• The freezer must not be connected to a GFCI (Ground Fault Circuit
Interrupter) protected outlet as it may be subject to nuisance tripping.
Operation outside of these conditions will affect the performance of the unit
and the samples stored inside.
The last character in the model number listed on the freezer identifies the
electrical specifications for your unit.
The dataplate is located on the upper left side of the unit.
Rated Frequency
Current / Phase
4.3 A 60 Hz/1
50/60 Hz/1
50/60 Hz/1
4.70 A 60 Hz/1
60 Hz/1
50 Hz/1
Power Approximate
Module Lab Freezer
Plug Weight Kg (lbs)
178 (394)
169 (373)
IEC C19
188 (415)
Approximate Exterior
Enzyme Freezer Dimensions
Weight Kg (lbs) (D x W x H)
203 (449)
93.6 x 71.1 x 199.4 cm
194 (428)
(36.9 x 28.0 x 78.5 in)
99.0 x 86.4 x 199.4 cm
220 (484)
(38.9 x 34.0 x 78.5 in)
Thermo Scientific