Operating Standards; Unit Specifications - Thermo Scientific TSG Series Installation And Operation Manual

Operating Standards

The units described in this manual are classified for use as
stationary equipment in a Pollution Degree 2 and Over voltage
Category II environment.
These units are designed to operate under the following
environmental conditions:
• Indoor use
• Altitude up to 2000 m (6512 feet)
• Maximum relative humidity 60% for temperatures from
15°C to 32°C (59°F to 90°F)
• Main supply voltage fluctuations not to drop or exceed by
10% of the nominal voltage
• Do not connect the unit to a GFCI (Ground Fault Circuit
Interrupter) protected outlet as it may be subject to
nuisance tripping
Table 3. Unit Specifications
Unit Size
(Cu.ft.)
TSG25FSSA 25
TSG49FSSA 49
General Purpose Freezers
Exterior Door
Type
Stainless
Solid
Steel
Stainless
Solid
Steel
• Do not run this unit off extension cords

Unit Specifications

The data label is located on top left side of the unit.
The specifications of Freezer like voltage, required wall
breaker amperage and power plug are same for all the units.
Voltage = 115 V/60 Hz
Breaker Amps = 15 A
Power Plug = NEMA 5-15P
This plug must be plugged into/supplied with it's own
individual branch circuit.
No.of Exterior Dimensions
Shelves (H x W x D)
78.25" x 30.7" x 31.88"
4
(1987.55 mm x 779.78 mm x 809.752 mm)
78" x 52.7" x 32"
8
(1981.2 mm x 1338.58 mm x 812.8 mm)
Operating Standards | 5