Thermo Scientific TSX Series Installation And Operation Manual page 22

Installation
18 TSX -20°C Laboratory and Enzyme Freezers
7. Once the slide is seated in the rear pilaster, rotate the slide until it is
parallel with the unit wall and insert slide into front pilaster.
Figure 8. Slide Installation
CAUTION: Ensure the slide is level. If the slide is not seated in a level
orientation, the drawers/baskets will not function as intended. This could
cause injury or product damage.
8. Replace the safety clip by hooking the clip under the front pilaster slide
bracket. Then rotate the wire safety clip to position the other bend of
the wire safety clip to position the other bend of the clip over the top of
the same bracket.
Figure 9. Clip Replacement
CAUTION: Drawer slides do not require lubrication. Additional lubricant
could impede movement of the drawers when lubricant is cold.
Thermo Scientific