Thermo Scientific TSX Series Installation And Operation Manual page 21

Thermo Scientific
3. Lift up the slide at the front. The slide is free to move from the front
pilaster.
Figure 6. Front of slide Removal
4. The drawer slide must be removed from the rear pilaster at
approximately a 45 degree angle towards the center of the cabinet.
Figure 7. Slide Rotation
5. Pull the slide towards the front of the cabinet.
6. Determine desired location for the slide and insert the slide into the rear
pilaster at a 45 degree angle towards the center of the cabinet.
TSX -20°C Laboratory and Enzyme Freezers
Installation
17