Function Display - Icom IC-SAT100 Operating Manual

2
PANEL DESCRIPTION

Function display

L The display is shown in English as an example. Select other languages on the Menu screen, if necessary.
([OK] > Display > Language)
D Icon Area
Indicators
1 SIGNAL STRENGTH
Displays the relative receive signal strength level.
2 CLOCK
Displays the current time.
3 BATTERY
Displayed or blinks to indicate the battery status.
Full Mid Charging
required
Icons
The following icons are displayed in the Icon Area.
LOCK
Displayed when the Lock function is ON. (p. 8)
SURVEILLANCE
Displayed when the Surveillance function is ON. (p. 9)
VIBRATION
Displayed when the Vibration function is ON. (p. 14)
Bluetooth ®
• " " is displayed when Bluetooth is activated. (p. 12)
• " " is displayed when a Bluetooth device is connected.
(p. 10)
MESSAGE
• Displayed when a message have been received. (p. 8)
• Displayed if unread messages are still in the Message
memory.
RECORD
Displayed when the Record function is ON. (p. 11)
USB
Displayed when a USB device is connected.
Battery exhausted
1 2 3
00:00
Last Call Scan
D Text Area
Displays the status, preset transceiver name, and
selected Talkgroup Name.
Status
IDLE
OPEN
REQUESTING Requesting a transmission.
TALKING
LISTENING
SCANNING
D Key Display Area
Displays the names of the function assigned to [P1]
and [P2]. You can assign functions in the Menu
screen. (p. 13)
5
Icon area
Text area
Key display area
Description
The selected Talkgroup is not active.
The selected Talkgroup is active but
no one is talking.
Transmitting
Receiving
Scanning a call