Troubleshooting - Icom IC-SAT100 Operating Manual

9

TROUBLESHOOTING

Troubleshooting
PROBLEM
The transceiver does
not turn ON.
Little or no sound
comes from the
speaker.
You cannot transmit.
You cannot use the
keypad.
No beep sounds.
POSSIBLE CAUSE
• The battery is exhausted.
• The battery pack is not correctly attached.
• Volume level is set too low.
• The battery is exhausted.
• An obstacle may exist between the
satellite and transceiver.
• The Key Lock function is ON.
• The Key beep is set to OFF.
• The audio output level is low.
• Recharge the battery pack.
• Correctly reattach the battery pack.
• Adjust the volume level.
• Recharge the battery pack.
• Retry transmitting in a place without
obstacles.
• Push [P2] until "Lock OFF" is displayed
to turn OFF the function.
• Adjust the key beep level in the Menu
screen.
([OK] > Beep/Vibration > Key Beep Lv)
• Rotate [VOL] to adjust the audio output
level.
17
SOLUTION REF.
p. 6
p. 2
p. 4
p. 6
p. 7
p. 4
p. 4
p. 4