Replacing The Oven Lamps - Elba EBO 9910 S Instructions For The Use

Multi-function oven
Table of Contents

Advertisement

GREASE FILTER (SUPPLIED WITH SOME MODELS ONLY)
A special screen is provided at the back of the oven to catch grease particles, mainly when
meat is being roasted (fig. 4.2a).
When baking pastry etc. this filter should be removed.
Slide in the grease filter on the back of the oven as in fig. 4.2a.
Clean the filter after any cooking!
The grease filter can be removed for cleaning and should be washed regularly in hot
soapy water.
Always clean the filter after cooking as any solid residues on it might adversely affect
the oven performance.
Always dry the filter properly before fitting it back into the oven.

REPLACING THE OVEN LAMPS

WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
Let the oven cavity and the heating elements to cool down;
Switch off the electrical supply;
Remove the protective cover "A" (fig. 4.2b);
Replace the halogen lamp "B" with a new one suitable for high temperatures (300°C)
having the following specifications: 230 V, 50 Hz and same power (check watt power
as stamped in the lamp itself ) of the replaced lamp;

IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from
your fingers can cause premature failure. Always use a clean cloth or gloves;
Refit the protective cover "A";
Note: Oven bulb replacement is not covered by your
guarantee.
22
A
B
WRONG
A
B
CORRECT
Fig. 4.2a
Fig. 4.2b

Advertisement

Table of Contents
loading

Table of Contents