Semi - Automatic Cooking - Elba EBO 9910 S Instructions For The Use

SEMI - AUTOMATIC COOKING

This automatically switches the oven off
after the required cooking time. There are
two methods of semi-automatic cooking:
1° METHOD:
cooking time (fig. 3.6)
Set the cooking time by pressing
•
button and then button
forward or
gone beyond the required time.
The letter A and the symbol
2° METHOD: Programming the end of
cooking time (fig. 3.7)
Set the end of cooking time by pressing
•
button and then button
forward or
gone beyond the required time.
The letter A and the symbol
Having programmed according to one of
the above methods, set the temperature
and function via the function selector and
thermostat knob (see specific chapters).
A
Fig. 3.6
Programming
to move
to move back if you have
will appear.
to move
to move back if you have
will appear.
The oven will come on immediately and
when the set time or programmed end of
cooking time expires, it will automatically
switch off.
During cooking the letter A and the symbol
remains on; press button
the
the remaining time until end of cooking.
The cooking program can be cancelled at
any time by pressing the two buttons
simultaneously.
At the end of cooking, turn the oven knob
to the off position the
out. The letter A will flash and the acoustic
signal will come on - this can be switched
off by pressing any of the buttons.
Reset the function selector and thermostat
knob and set the programmer to manual
by pressing the two buttons
simultaneously.
Important: Also if oven is turned off
automatically
remember to turn to the off position the
function selector and the thermostat knob.
If not, when pressing two buttons
simultaneously for manual use, the oven
will start to operate.
Remember to press the two buttons
simultaneously to be able to use the
oven in manual setting.
Fig. 3.7
symbol will go
by the programmer,
A
to display
17